R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

203
Table 82 Command output
Field Descri
p
tion
connections
Connection statistics, including the number of connections in up state, the number
of connections in down state, the number of local connections, the number of
remote connections, and the number of unknown connections.
No. Sequence number.
vpn-name Name of the MPLS L2VPN.
local-num Number of local connections.
remote-num Number of remote connections.
unknown-num Number of unknown connections.
up-num Number of connections that are up.
total-num Total number of connections.
display mpls l2vpn fib ac vpws
Use display mpls l2vpn fib ac vpws to display Attachment Circuit (AC) information for the MPLS L2VPN.
Syntax
display mpls l2vpn fib ac vpws [ interface interface-type interface-number [ service-instance
service-instanceid ] ] [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies the interface connected to a CE by the interface type
and number.
service-instance service-instanceid: Specifies a service instance by its ID in the range of 1 to 4094.
slot slot-number: Displays the AC information for a card. The slot-number argument specifies the number
of the slot that holds the card.
The following matrix shows the option and router compatibility:
Option 6602 HSR6602 6604/6608/6616
slot slot-number No Yes Yes
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.