R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

204
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
• If you specify an interface but do not specify a service instance, the command displays the AC
entries of the VCs created on the Layer 3 interface.
• If you specify both an interface and a service instance, the command displays the AC entries of the
VCs created for the service instance on the Layer 2 interface.
• If you do not specify any parameter, the command displays the AC entries of all VCs.
Examples
# Display AC information for the MPLS L2VPN.
<Sysname> display mpls l2vpn fib ac vpws
Total AC Entry:2
**In Interface : Eth1/1
Service Instance ID : 1
Access Mode : Vlan
CE Type : PortVlan
AC Encapsulation : 100
**In Interface : Eth1/1
Service Instance ID : 2
Access Mode : Vlan
CE Type : Independent
AC Encapsulation : s-vid 101 c-vid 400 to 500 600 700
# Display AC information for service instance 1 on Layer 2 Ethernet interface GigabitEthernet 2/1/1.
<Sysname> display mpls l2vpn fib ac vpws interface gigabitethernet 2/1/1 service-instance
1
**In Interface : Eth1/1
Service Instance ID : 1
Access Mode : Vlan
CE Type : PortVlan
AC Encapsulation : 2
InBytes : 34408752586
OutBytes : 13202790780
Table 83 Command output
Field Descri
p
tion
Total AC Entry
Total number of VPWS AC entries, which is displayed only when you
display all VPWS AC entries.
In Interface Incoming interface, which is bound to L2VPN.
AccessMode Access mode at the AC side.
CEType Interface encapsulation type at the AC side, PortVlan or Independent.
AC Encapsulation Encapsulation VLAN information at the AC side.
InBytes
Number of bytes received on the AC.
This field is displayed only when inbound traffic statistics is enabled for
the service instance.