R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

205
Field Descri
p
tion
OutBytes
Number of bytes sent by the AC.
This field is displayed only when outbound traffic statistics is enabled for
the service instance.
display mpls l2vpn fib pw vpws
Use display mpls l2vpn fib pw vpws to display pseudowire (PW) entry information for the MPLS L2VPN.
Syntax
display mpls l2vpn fib pw vpws [ interface interface-type interface-number [ service-instance
service-instanceid ] ] [ slot slot-number ] [ verbose ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-type interface-number: Specifies the interface connecting a CE by the interface type
and number.
service-instance service-instanceid: Specifies a service instance by its ID in the range of 1 to 4094.
verbose: Displays the detailed information.
slot slot-number: Displays the PW entry information for a card. The slot-number argument specifies the
number of the slot that holds the card.
The following matrix shows the option and router compatibility:
Option 6602 HSR6602 6604/6608/6616
slot slot-number No Yes Yes
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
• If you specify an interface but do not specify a service instance, the command displays the PW
entries of the VCs created on the Layer 3 interface.
• If you specify both an interface and a service instance, the command displays the PW entries of the
VCs created for the service instance on the Layer 2 interface.
• If you do not specify any parameter, the command displays the PW entries of all VCs.