R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

224
Use undo service-instance to delete a service instance on the current interface.
Syntax
service-instance instance-id
undo service-instance instance-id
Default
No service instances have been created on any interface.
Views
Interface view
Default command level
2: System level
Parameters
instance-id: Specifies a service instance ID in the range of 1 to 4096.
Usage guidelines
This command is supported only on routers with SAP-4EXPs.
The device can support up to 20480 service instances.
Examples
# Create service instance 1 on Ten-GigabitEthernet 1/0/1, and then enter service instance view.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] service-instance 1
[Sysname-Ten-GigabitEthernet1/0/1-srv1]
static backup-label
Use static backup-label to configure VC labels for a backup VC.
Use undo static backup-label to remove the VC labels configured for the backup VC.
Syntax
static backup-label local local-vc remote remote-vc
undo static backup-label
Default
No VC labels are configured for a backup VC.
Views
Static-L2VC view, static-xpeer view
Default command level
2: System level
Parameters
local local-vc: Specifies the local VC label in the range of 16 to 1023.
remote remote-vc: Specifies the remote VC label in the range of 16 to 1023.