R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

245
Field Descri
p
tion
In VC Label Incoming VC label.
Out VC Label Outgoing VC label.
Local MTU Maximum transmission unit configured on the local PE.
Role PW role: Main, Backup, or Normal.
State PW state: Active or Standby.
Dual Link ID
Link ID of the other PW, which is displayed when primary
and backup PWs exist in the VPLS instance.
Fast Switch Group ID PW group ID.
Tunnel ID
Public tunnel ID and entry state (Done or Waiting).
GRCount indicates the number of times that GR occurs.
display pw-class
Use display pw-class to display information about one or all PW classes.
Syntax
display pw-class [ pw-class-name ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
pw-class-name: Specifies the name of a PW class, a case-insensitive string of 1 to 19 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no PW class is specified, the command displays information about all PW classes.
If you specify a PW class, the output of the display command includes an additional field to show the
number of times the PW class has been referenced.
Examples
# Display information about all PW classes.
<Sysname> display pw-class
Total 3 PW-class(es)
PW-class name Transport mode Tunnel policy