R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

------------------------------------------------------------------------------

IF-Name Status LAM Transport-Address Hello-Sent/Rcv

------------------------------------------------------------------------------

GigabitEthernet2/1/1 Active DU 172.17.1.1 583/1017

GigabitEthernet2/1/2 Active DU 172.17.1.1 578/1015

Serial3/1/0 Active DU 172.17.1.1 531/444

-------------------------------------------------------------------

LAM: Label Advertisement Mode IF-Name: Interface name

# Display the detailed LDP information for all LDP-enabled interfaces.

<Sysname> display mpls ldp interface verbose

LDP Interface Information in Public Network

--------------------------------------------------------------

Interface Name : GigabitEthernet2/1/1

LDP ID : 172.17.1.1:0 Transport Address : 172.17.1.1

Entity Status : Active Interface MTU : 1500

Configured Hello Timer : 15 Sec

Negotiated Hello Timer : 15 Sec

Configured Keepalive Timer : 45 Sec

Label Advertisement Mode : Downstream Unsolicited

Hello Message Sent/Rcvd : 591/1033 (Message Count)

-------------------------------------------------------------

Interface Name : GigabitEthernet2/1/2

LDP ID : 172.17.1.1:0 Transport Address : 172.17.1.1

Entity Status : Active Interface MTU : 1500

Configured Hello Timer : 15 Sec

Negotiated Hello Timer : 15 Sec

Configured Keepalive Timer : 45 Sec

Label Advertisement Mode : Downstream Unsolicited

Hello Message Sent/Rcvd : 586/1031 (Message Count)

-----------------------------------------------------------

Interface Name : Serial3/1/0

LDP ID : 172.17.1.1:0 Transport Address : 172.17.1.1

Entity Status : Active Interface MTU : 1500

Configured Hello Timer : 15 Sec

Negotiated Hello Timer : 15 Sec

Configured Keepalive Timer : 45 Sec

Label Advertisement Mode : Downstream Unsolicited

Hello Message Sent/Rcvd : 539/452 (Message Count)

-------------------------------------------------------------

Table 7 Command output

Field Descri

tion

LDP ID

LDP identifier. It identifies the label space of an LSR.

An LDP ID consists of the LSR ID and label space ID. Now, the

label space ID can only be 0, which indicates that the entire LSR

uses one label space.