R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

252
Field Descri
p
tion
Interface Name
Name of the Layer 2 Ethernet interface where the service instance
associated with the VPLS instance resides.
State
Status of the Layer 2 Ethernet interface where the service instance
associated with the VPLS instance resides.
PW Type
PW type:
• label—NPW, the PW with a PE.
• MEHVPLS—UPW, the PW with a UPE.
Related commands
vsi
display vsi remote
Use display vsi remote to display information about remote VPLS connections using a specific signaling
protocol.
Syntax
display vsi remote { bgp | ldp } [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
bgp: Displays information about remote VPLS connections using the signaling protocol of BGP.
ldp: Displays information about remote VPLS connections using the signaling protocol of LDP.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display information about remote VPLS connections using LDP.
<Sysname> display vsi remote ldp
Vsi Peer VC Group Vsi MTU Vsi
ID RouterID Label ID Type Value Index
500 60.1.1.1 524688 0 vlan 1500 0
Table 104 Command output
Field Descri
p
tion
Vsi ID ID of the VPLS instance.