R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

21
Remote Peer Name : BJI
Remote Peer IP : 3.3.3.3 LDP ID : 1.1.1.1:0
Transport Address : 1.1.1.1
Configured Keepalive Timer : 45 Sec
Configured Hello Timer : 45 Sec
Negotiated Hello Timer : 45 Sec
Hello Message Sent/Rcvd : 3/2 (Message Count)
--------------------------------------------------------------------------
Table 11 Command output
Field Descri
p
tion
LDP ID
Local LDP identifier. For a description of the LDP identifier, see the LDP
ID field in Table 7.
Transport Address
Local LDP transport address used to establish a TCP connection with
this remote peer.
Hello Message Sent/Rcvd Counts of hello messages sent to/received from this remote peer.
Related commands
• mpls ldp (interface view)
• mpls ldp (system view)
• remote-ip
display mpls ldp session
Use display mpls ldp session to display information about LDP sessions.
Syntax
display mpls ldp session [ all [ verbose ] | [ vpn-instance vpn-instance-name ] [ peer-id | verbose ] ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Displays all information.
verbose: Displays detailed information.
vpn-instance vpn-instance-name: Displays information about all LDP sessions of the specified VPN. The
vpn-instance-name argument is the instance name of an MPLS L3VPN, a case-sensitive string of 1 to 31
characters.
peer-id: Displays the LDP session information for a peer. The peer-id argument indicates the LSR ID of the
peer.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.