R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

306
Field Descri
p
tion
MD5 authentication enabled MD5 authentication for the sham link is enabled.
The last key Latest key ID for MD5 authentication.
neighbor(s) Number of neighbors that do not finish the rollover.
Related commands
sham-link
display tunnel-policy
Use display tunnel-policy to display information about a tunneling policy or all tunneling policies.
Syntax
display tunnel-policy { all | policy-name tunnel-policy-name } [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all: Specifies all tunneling policies.
tunnel-policy-name: Specifies the name of a tunneling policy, a string of 1 to 19 characters.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display all tunneling policies.
<Sysname> display tunnel-policy all
Tunnel policy name : 1
Preferred paths : not configured
Select-Seq : CR-LSP
Load balance number : 1
Tunnel policy name : 2
Preferred paths : not configured
Select-Seq : LSP
Load balance number : 8
Tunnel policy name : 3