R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

315
Syntax
ip vpn-instance vpn-instance-name
undo ip vpn-instance vpn-instance-name
Views
System view
Default command level
2: System level
Parameters
vpn-instance-name: Specifies the name for the VPN instance, a case-sensitive string of 1 to 31 characters.
Usage guidelines
A VPN instance takes effect only after you configure an RD for it.
Examples
# Create a VPN instance named vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1]
Related commands
route-distinguisher
ipv4-family vpnv4
Use ipv4-family vpnv4 in BGP view to enter BGP-VPNv4 subaddress family view.
Use undo ipv4-family vpnv4 to remove all settings configured in BGP-VPNv4 subaddress family view.
Syntax
ipv4-family vpnv4
undo ipv4-family vpnv4
Views
BGP view
Default command level
2: System level
Examples
# Enter BGP-VPNv4 subaddress family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4]
ipv4-family (VPN instance view)
Use ipv4-family in VPN instance view to enter IPv4 VPN view.