R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide
23
Negotiated Keepalive Timer : 45 Sec
Keepalive Message Sent/Rcvd : 6/6 (Message Count)
Label Advertisement Mode : Downstream Unsolicited
Label Resource Status(Peer/Local) : Available/Available
Peer Discovery Mechanism : Extended
Session existed time : 000:00:01 (DDD:HH:MM)
LDP Extended Discovery Source : Remote peer: 1
Addresses received from peer: (Count: 2)
10.1.1.1 1.1.1.1
--------------------------------------------------------------------------
Peer LDP ID : 2.2.2.2:0 Local LDP ID : 3.3.3.3:0
TCP Connection : 3.3.3.3 -> 2.2.2.2
Session State : Operational Session Role : Active
Session FT Flag : Off MD5 Flag : Off
Reconnect Timer : --- Recovery Timer : ---
Negotiated Keepalive Timer : 45 Sec
Keepalive Message Sent/Rcvd : 25/25 (Message Count)
Label Advertisement Mode : Downstream Unsolicited
Label Resource Status(Peer/Local) : Available/Available
Peer Discovery Mechanism : Basic
Session existed time : 000:00:06 (DDD:HH:MM)
LDP Basic Discovery Source : GigabitEthernet2/1/1
Label Acceptance Policy : prefix-from-rt1
Addresses received from peer: (Count: 3)
10.1.1.2 20.1.1.1 2.2.2.2
--------------------------------------------------------------------------
Table 13 Command output
Field Descri
p
tion
Peer LDP ID
LDP identifier of the peer. For a description of the LDP identifier, see
the LDP ID field in Table 7.
Local LDP ID
Local LDP identifier. For a description of the LDP identifier, see the LDP
ID field in Table 7.
Session State For the description of session states, see the Status field in Table 7.
Session Role Role of the current LSR in the session, Active or Passive.
Session FT Flag
Indicates whether the peer has enabled the GR function for the
session. If the L bit in the FT Session TLV is set to 1, it indicates that the
GR function is enabled for the session.
MD5 Flag Indicates whether MD5 authentication is enabled on the peer.
Reconnect Timer FT reconnect timer.
Recovery Timer LDP recovery timer.










