R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

330

Syntax

peer { group-name | ip-address } route-policy route-policy-name { export | import }

undo peer { group-name | ip-address } route-policy route-policy-name { export | import }

Default

No routing policy is applied to a peer or peer group.

Views

BGP-VPNv4 subaddress family view

Default command level

2: System level

Parameters

group-name: Specifies the name of the peer group, a case-sensitive string of 1 to 47 characters.

ip-address: Specifies the IP address of the peer.

route-policy-name: Specifies the name of the routing policy, a case-sensitive string of 1 to 63 characters.

export: Filters the routes to be advertised to the peer or peer group.

import: Filters the routes received from the peer or peer group.

Examples

# In BGP-VPNv4 subaddress family view, apply routing policy test-policy to filter the routes received from

peer group test.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] ipv4-family vpnv4

[Sysname-bgp-af-vpnv4] peer test route-policy test-policy import

peer upe

Use peer upe to configure a BGP peer or peer group as an HoVPN UPE for a BGP-VPNv4 subaddress

family.

Use undo peer upe to remove the configuration.