R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

include: Displays information about the LSP for the specified FEC.

ipv4-dest-addr mask-length: Specifies a FEC by an IPv4 destination address and the mask length of the

destination address. The value range for the mask length is 0 to 32.

Ipv6-dest-addr mask-length: Specifies a FEC by its IPv6 destination address and the length of the mask.

The value range for the mask length is 0 to 128.

verbose: Displays detailed information.

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see Fundamentals Configuration Guide.

• begin: Displays the first line that matches the specified regular expression and all lines that follow.

• exclude: Displays all lines that do not match the specified regular expression.

• include: Displays all lines that match the specified regular expression.

• regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Usage guidelines

With no parameters specified, the command displays information about all LSPs.

Examples

# Display information about all LSPs.

<Sysname> display mpls lsp

-----------------------------------------------------------------------

LSP Information: L3VPN LSP

-----------------------------------------------------------------------

FEC In/Out Label In/Out IF Route-Distinguisher Vrf Name

100.1.1.1 1025/1024 -/- 100:1 N/A (ASBR)

-----------------------------------------------------------------------

LSP Information: LDP LSP

-----------------------------------------------------------------------

FEC In/Out Label In/Out IF Vrf Name

100.10.1.0/24 3/NULL -/-

168.1.0.0/16 3/NULL -/-

172.17.0.0/16 3/NULL -/-

Table 14 Command output

Field Descri

tion

FEC

Forwarding equivalence class in either of these two forms:

• IP address/mask—Classifies packets to FECs based on destination

addresses.

• IP address—Classifies packets to FECs based on the addresses of the next

hops.

Vrf Name

MPLS L3VPN name.

This field is blank for a public network or N/A (ASBR) for an ASBR LSP.

# Display detailed information about all LSPs.

<Sysname> display mpls lsp verbose