R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

350
<Sysname> system-view
[Sysname] tunnel-policy po1
[Sysname-tunnel-policy-po1]
Related commands
tunnel select-seq
vpn popgo
Use vpn popgo on an egress PE to specify the VPN label processing mode as POPGO forwarding, which
will pop the label and then search for the outbound interface according to the label to forward the traffic.
Use undo vpn popgo to restore the default.
Syntax
vpn popgo
undo vpn popgo
Default
The VPN label processing mode of an egress PE is POP forwarding, which will pop the label and then
search the FIB table to find the outbound interface to forward the traffic.
Views
System view
Default command level
2: System level
Usage guidelines
After you execute the vpn popgo or undo vpn popgo command on the device, you must reboot the device
to validate the configuration.
After the command is executed successfully, the device does not inform you of the result. You can use the
display vpn label operation command to view the current VPN label processing mode.
Examples
# Specify the VPN label processing mode of an egress PE as outbound interface based forwarding.
<Sysname> system-view
[Sysname] vpn popgo
# Specify the VPN label processing mode of an egress PE as FIB based forwarding.
<Sysname> system-view
[Sysname] undo vpn popgo
vpn-instance-capability simple
Use vpn-instance-capability simple to disable routing loop detection for the VPN OSPF process.
Use undo vpn-instance-capability to restore the default.
Syntax
vpn-instance-capability simple
undo vpn-instance-capability