R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

55
mpls ldp remote-peer
Use mpls ldp remote-peer to create a remote peer entity and enter MPLS LDP remote peer view.
Use undo mpls ldp remote-peer to remove a remote peer entity.
Syntax
mpls ldp remote-peer remote-peer-name
undo mpls ldp remote-peer remote-peer-name
Views
System view
Default command level
2: System level
Parameters
remote-peer-name: Specify a name for the remote peer, a case-insensitive string of 1 to 32 characters.
Examples
# Create a remote peer entity named BJI and enter MPLS LDP remote peer view.
<Sysname> system-view
[Sysname] mpls ldp remote-peer BJI
[Sysname-mpls-ldp-remote-bji]
Related commands
remote-ip
mpls ldp timer hello-hold
Use mpls ldp timer hello-hold to set a Hello timer.
Use undo mpls ldp timer hello-hold to restore the default.
Syntax
mpls ldp timer hello-hold value
undo mpls ldp timer hello-hold
Default
The value of the link Hello timer is 15 seconds and that of the targeted Hello timer is 45 seconds.
Views
Interface view, MPLS LDP remote peer view
Default command level
2: System level
Parameters
value: Specifies the value of the Hello timer, in the range of 1 to 65535, in seconds.