R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

61
<Sysname> system-view
[Sysname] mpls statistics enable lsp in-label 1024
Related commands
• display mpls statistics interface
• display mpls statistics lsp in-label
• display mpls statistics tunnel
non-stop-routing
Use non-stop-routing to enable the LDP NSR function.
Use undo non-stop-routing to disable the LDP NSR function.
Syntax
non-stop-routing
undo non-stop-routing
Default
The LDP NSR function is disabled.
Views
MPLS LDP view
Default command level
2: System level
Usage guidelines
The graceful-restart command and the non-stop-routing command are mutually exclusive. Do not
configure both commands on the device.
The following matrix shows the command and router compatibility:
Command 6602 HSR6602 6604/6608/6616
non-stop-routing No No
• Yes on routers with the RPE-X1 or RSE-X1 MPU.
• No on routers with MCP MPUs.
Examples
# Enable the LDP NSR function.
<Sysname> system-view
[Sysname] mpls
[Sysname-mpls] quit
[Sysname] mpls ldp
[Sysname-mpls-ldp] non-stop-routing
path-vectors
Use path-vectors to specify the path vector length.
Use undo path-vectors to restore the default.