R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

84
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no IS-IS level is specified, this command displays information about TE networks in the IS-IS Level-1-2
area is displayed.
Examples
# Display information about IS-IS TE networks.
<Sysname> display isis traffic-eng network
TE information for ISIS(1)
--------------------------
Level-1 Network Information
---------------------------
DIS Router ID : 89.1.1.1 DIS's Ip Address : 86.1.1.1
Status In CSPF : ACTIVE Attached Router Count : 2
List of Attached Routers
RouterId : 89.1.1.1 Nbr : 1111.1111.1111.00
Link State : 1
RouterId : 89.2.2.2 Nbr : 1111.1111.1113.00
Link State : 1
Total Number of TE Networks in Level-1 Area: 1, Num Active: 1
Level-2 Network Information
---------------------------
DIS Router ID : 89.1.1.1 DIS's Ip Address : 86.1.1.1
Status In CSPF : ACTIVE Attached Router Count : 2
List of Attached Routers
RouterId : 89.1.1.1 Nbr : 1111.1111.1111.00
Link State : 1
RouterId : 89.2.2.2 Nbr : 1111.1111.1113.00
Link State : 1
Total Number of TE Networks in Level-2 Area: 1, Num Active: 1
Table 30 Command output
Field Descri
p
tion
DIS's Ip Address IP address of the DR router.
Status In CSPF CSPF state.
Attached Router Count Number of attached routers.