R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

87
Table 32 Command output
Field Descri
p
tion
Unreserved sub-pool bandwidth sub-tlv value Sub-TLV of unreserved subpool bandwidth.
Bandwidth constraint sub-tlv value Bandwidth constraint sub-TLV.
LO multiplier sub-tlv value LOM sub-TLV.
Related commands
te-set-subtlv
display mpls lsp bfd te
Use display mpls lsp bfd te to display BFD information for MPLS TE tunnels.
Syntax
display mpls lsp bfd [ te tunnel tunnel-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
tunnel tunnel-number: Displays BFD information for the specified MPLS TE tunnel. tunnel-number is the
tunnel interface number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display BFD information for the MPLS TE tunnel using tunnel interface Tunnel 0.
<Sysname> display mpls lsp bfd te Tunnel 0
MPLS BFD Session(s) Information
-----------------------------------------------------------------------------
FEC : Tunnel0 Type : TE Tunnel
Local Discr : 3 Remote Discr : 3
Tunnel ID : 0xd2009 NextHop : ----
Session State : Up Source IP : 1.1.1.1
Session Role : Active
Total Session Num: 1