R3303-HP 6600/HSR6600 Routers MPLS Command Reference Guide

88
Table 33 Command output
Field Descri
p
tion
Type Type of the tunnel detected by BFD: LSP or TE Tunnel.
Local Discr Local discriminator of the BFD session.
Remote Discr Remote discriminator of the BFD session.
Session State Status of the BFD session: Init (initializing), Up, or Down.
Source IP IP address of the active end (ingress LSR) of the BFD session.
Session Role Role of the LSR in the BFD session: Active or Passive.
display mpls rsvp-te
Use display mpls rsvp-te to display RSVP-TE configuration.
Syntax
display mpls rsvp-te [ interface [ interface-type interface-number ] [ | { begin | exclude | include }
regular-expression ] ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface: Displays RSVP-TE configuration for interfaces.
interface-type interface-number: Specifies an interface for which RSVP-TE configuration is displayed.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If the interface keyword is not specified, the global RSVP-TE configuration is displayed.
If no interface is specified through the interface-type interface-number argument, the RSVP-TE
configuration of all RSVP-TE enabled interfaces is displayed.
Examples
# Display the global RSVP-TE configuration.
<Sysname> display mpls rsvp-te
LSR ID: 4.4.4.4
Resv Confirmation Request: DISABLE
RSVP Hello Extension: ENABLE