R3303-HP 6600/HSR6600 Routers MPLS Configuration Guide

298
Ste
p
Command Remarks
5. Configure the system to be the
RR and specify the peer as the
client of the RR.
peer { group-name | ip-address }
reflect-client
Optional.
By default, no RR or RR client is
configured.
After you configure a VPN site as
an IBGP peer of the MCE, the MCE
does not advertise the BGP routes
learned from the VPN site to other
IBGP peers, including VPNv4
peers. Only when you configure
the VPN site as a client of the RR
(the MCE), does the MCE advertise
routes learned from it to other IBGP
peers.
6. Redistribute remote site routes
advertised by the PE.
import-route protocol [ process-id
| all-processes ] [ med med-value |
route-policy route-policy-name ] *
By default, no route redistribution
is configured.
7. Configure a filtering policy to
filter the routes to be
advertised.
filter-policy { acl-number |
ip-prefix ip-prefix-name } export
[ direct | isis process-id | ospf
process-id | rip process-id | static ]
Optional.
By default, BGP does not filter the
routes to be advertised.
8. Configure a filtering policy to
filter the received routes.
filter-policy { acl-number |
ip-prefix ip-prefix-name } import
Optional.
By default, BGP does not filter the
received routes.
2. Configure the VPN site:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Configure the MCE as the
IBGP peer.
peer { group-name | ip-address }
as-number as-number
N/A
4. Redistribute the IGP routes of
the VPN.
import-route protocol [ process-id ]
[ med med-value | route-policy
route-policy-name ] *
Optional.
A VPN site must advertise the VPN
network addresses it can reach to
the connected MCE.
Configuring routing between MCE and PE
MCE-PE routing configuration includes these tasks:
• Bind the MCE-PE interfaces to VPN instances.
• Perform route configurations.
• Redistribute VPN routes into the routing protocol running between the MCE and the PE.
Perform the following configuration tasks on MCE. Configurations on the PE are similar to those on the PE
in common MPLS L3VPN network solutions (see "Configuring static routing between a PE and a CE")
.