R3303-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

98
Usage guidelines
When IPC performance statistics is disabled, the statistics data does not change. The display ipc
performance command displays the statistics collected before IPC performance statistics was disabled.
Examples
# Enable IPC performance statistics for channel 18 on node 6.
<Sysname> ipc performance enable node 6 channel 18
reset ipc performance
Use reset ipc performance to clear IPC performance statistics.
Syntax
reset ipc performance [ node node-id | self-node ] [ channel channel-id ]
Views
User view
Default command level
1: M o n i t o r l ev e l
Parameters
node node-id: Clears the IPC performance statistics for the node specified by the node-id argument. The
following matrix shows the value ranges for the node-id argument:
6602 HSR6602 6604/6608/6616
0 to 1 0 to 2
• 0 to 3 for 6604
• 0 to 5 for 6608
• 0 to 9 for 6616
self-node: Clears the IPC performance statistics for the local node.
channel channel-id: Clears the IPC performance statistics for the channel specified by the channel-id
argument.
Usage guidelines
After this command is executed, the corresponding statistics will be cleared.
Examples
# Clear the IPC performance statistics for channel 18 on node 6.
<Sysname> reset ipc performance node 6 channel 18