R3303-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

114
Examples
# Create the read-only community readaccess so an NMS can use the protocol SNMPv1 or SNMPv2c
and community name readaccess to read the MIB objects in the default view ViewDefault.
<Sysname> system-view
[Sysname] snmp-agent sys-info version v1 v2c
[Sysname] snmp-agent community read readaccess
# Create the read and write community writeaccess s o o n ly t h e h os t a t 1.1.1.1 c a n u s e th e p r ot o c o l
SNMPv2c and community name writeaccess to read and set the MIB objects in the default view
ViewDefault.
<Sysname> system-view
[Sysname] acl number 2001
[Sysname-acl-basic-2001] rule permit source 1.1.1.1 0.0.0.0
[Sysname-acl-basic-2001] rule deny source any
[Sysname-acl-basic-2001] quit
[Sysname] snmp-agent sys-info version v2c
[Sysname] snmp-agent community write writeaccess acl 2001
# Create the read and write community wr-sys-acc so an NMS can use the protocol SNMPv1 or
SNMPv2c, community name wr-sys-acc to read and set the MIB objects in the system subtree (OID
1. 3 . 6 .1. 2 .1.1) .
<Sysname> system-view
[Sysname] snmp-agent sys-info version v1 v2c
[Sysname] undo snmp-agent mib-view ViewDefault
[Sysname] snmp-agent mib-view included test system
[Sysname] snmp-agent community write wr-sys-acc mib-view test
Related commands
snmp-agent mib-view
snmp-agent group
Use snmp-agent group to create an SNMP group and specify its access right.
Use undo snmp-agent group to delete an SNMP group.
Syntax
SNMPv1 and SNMP v2c (in non-FIPS mode):
snmp-agent group { v1 | v2c } group-name [ read-view view-name ] [ write-view view-name ]
[ notify-view view-name ] [ acl acl-number | acl ipv6 ipv6-acl-number ] *
undo snmp-agent group { v1 | v2c } group-name
SNMPv3 (in non-FIPS mode or in FIPS mode):
snmp-agent group v3 group-name [ authentication | privacy ] [ read-view view-name ] [ write-view
view-name ] [ notify-view view-name ] [ acl acl-number | acl ipv6 ipv6-acl-number ] *
undo snmp-agent group v3 group-name [ authentication | privacy ]
Default
No SNMP group exists. SNMPv3 groups use the no authentication, no privacy security model if neither
authentication nor privacy is specified.