R3303-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

169
display ip netstream template
Use display ip netstream template to display configuration and status information about the NetStream
flow record template.
Syntax
display ip netstream template [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: M o n i t o r l ev e l
Parameters
slot slot-number: Displays NetStream template information about a card. The slot-number argument
specifies a card by its slot number.
The following matrix shows the option and router compatibility:
Option 6602 HSR6602 6604/6608/6616
slot slot-number No Yes Yes
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# The NetStream aggregation mode of AS is enabled. Display information about the NetStream flow
record template.
<Sysname> display ip netstream template
Stream template refresh-rate packet : 20
Stream template refresh-rate time(in minute) : 30
Active stream templates : 2
Added stream templates : 2
as outbound template:
Template ID : 3258
Packets : 0
Last template export time : Never
Field count : 14
Field type Field length (byte)
---------------------------------------------------------------------------
Flows 4
Out packets 8
Out bytes 8