R3303-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

172
ip netstream
Use ip netstream to enable NetStream on the specified interface.
Use undo ip netstream to disable NetStream on the specified interface.
Syntax
ip netstream { inbound | outbound }
undo ip netstream { inbound | outbound }
Default
NetStream is disabled on an interface.
Views
Interface view
Default command level
3: Manage level
Parameters
inbound: Enables NetStream for incoming traffic.
outbound: Enables NetStream for outgoing traffic.
Examples
# Enable NetStream for incoming traffic on interface GigabitEthernet 2/0/0.
<Sysname> system-view
[Sysname] interface gigabitethernet 2/0/0
[Sysname-GigabitEthernet2/0/0] ip netstream inbound
ip netstream aging
Use ip netstream aging to enable periodical aging and TCP FIN- and RST-triggered aging.
Use undo ip netstream aging to disable periodical aging and TCP FIN- and RST-triggered aging.
Syntax
ip netstream aging
undo ip netstream aging
Default
Periodical aging and TCP FIN- and RST-triggered aging are enabled.
Views
System view
Default command level
3: Manage level
Parameters
None