R3303-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

174
tos-source-prefix: Specifies the ToS-source-prefix aggregation by ToS, source AS number, source prefix,
source address mask length, and inbound interface index.
Usage guidelines
In NetStream aggregation view, you can perform the following tasks:
• Enable or disable the specified NetStream aggregation.
• Configure source interface, destination IP address, and destination port for export of NetStream
data.
Examples
# Set the NetStream aggregation mode as AS, and enter the NetStream AS aggregation view.
<Sysname> system-view
[Sysname] ip netstream aggregation as
[Sysname-ns-aggregation-as]
Related commands
• enable
• ip netstream export host
• ip netstream export source
ip netstream export host
Use ip netstream export host to set the destination address and destination UDP port number for
NetStream data export.
Use undo ip netstream export host to delete the specified or all export addresses that are configured in
the specified view.
Syntax
ip netstream export host ip-address udp-port [ vpn-instance vpn-instance-name ]
undo ip netstream export host [ ip-address [ vpn-instance vpn-instance-name ] ]
Default
No destination address or destination UDP port number is configured in system view or aggregation
view.
Views
System view, NetStream aggregation view
Default command level
3: Manage level
Parameters
ip-address: Specifies a destination IP address for NetStream data export.
udp-port: Specifies a destination UDP port number for NetStream data export, in the range of 0 to
65535.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN that the NetStream data export destination
belongs to. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the
destination is on the public network, do not specify this option.