R3303-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

226
Syntax
info-center syslog min-age hours
undo info-center syslog min-age
Default
The minimum age of a syslog message is 0, which indicates that the message can be overwritten by new
messages at any time.
Views
System view
Default command level
2: System level
Parameters
hours: Specifies the minimum age of syslog messages, in the range of 0 to 8760 hours.
Examples
# Set the minimum age of syslog messages to 168 hours.
<Sysname> system-view
[Sysname] info-center syslog min-age 168
info-center timestamp
Use info-center timestamp to configure the timestamp format for system information sent to all
destinations except the log host.
Use undo info-center timestamp to restore the default.
Syntax
info-center timestamp { debugging | log | trap } { boot | date | none }
undo info-center timestamp { debugging | log | trap }
Default
The timestamp format for system information is date.
Views
System view
Default command level
2: System level
Parameters
debugging: Sets the timestamp format for debug information.
log: Sets the timestamp format for log information.
trap: Sets the timestamp format for trap information.
boot: Sets the timestamp format as xxxxxx.yyyyyy, where xxxxxx is the most significant 32 bits (in
milliseconds) and yyyyyy is the least significant 32 bits. For example, 0.21990989 equals Jun 25
14 : 0 9: 26 : 8 81 2 007. T h e boot time shows the time since system startup.