R3303-HP 6600/HSR6600 Routers Network Management and Monitoring Command Reference

232
The undo terminal monitor command automatically disables the monitoring of log, trap, and debug
information.
The configuration of this command is only valid for the current connection between the terminal and the
device. If a new connection is established, the monitoring of system information on the terminal restores
the default.
Examples
# Enable the monitoring of system information on the current terminal.
<Sysname> terminal monitor
Info: Current terminal monitor is on.
terminal trapping
Use terminal trapping to enable the display of trap information on the current terminal.
Use undo terminal trapping to disable the display of trap information on the current terminal.
Syntax
terminal trapping
undo terminal trapping
Default
The display of trap information on the current terminal is enabled.
Views
User view
Default command level
1: M o n i t o r l ev e l
Usage guidelines
To view the trap information, execute the terminal monitor and terminal trapping commands, and then
enable the information center (enabled by default).
The configuration of this command is only valid for the current connection between the terminal and the
device. If a new connection is established, the display of trap information on the terminal restores the
default.
Examples
# Enable the display of trap information on the current terminal.
<Sysname> terminal trapping
Info: Current terminal trapping is on.