R3102-R3103-HP 6600/HSR6600 Routers Layer 3 - IP Routing Command Reference

150
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no level is specified, the command displays both Level-1 and Level-2 LSDB.
If the lsp-name keyword is specified, to display the LSDB:
• You can enter either the lspid or lspname argument when no host name-to-system ID mapping is
configured.
• You can enter only the lspname argument when the host name-to-system ID mapping is configured.
Examples
# Display brief Level-1 LSDB information.
<Sysname> display isis lsdb level-1
Level-1 Link State Database
LSPID Seq Num Checksum Holdtime Length ATT/P/OL
--------------------------------------------------------------------------
1000.0000.0001.00-00* 0x00000016 0x314e 557 112 0/0/0
1000.0000.0001.00-01* 0x0000000b 0xbd7 0 (616) 27 0/0/0
1000.0000.0001.00-02* 0x0000000f 0x68aa 557 67 0/0/0
1000.0000.0002.00-00 0x00000009 0x20ba 945 110 0/0/0
1000.0000.0002.00-01 0x00000006 0x9f1c 945 67 0/0/0
1000.0000.0002.01-00 0x00000004 0x1b9c 945 55 0/0/0
*-Self LSP, +-Self LSP(Extended), ATT-Attached, P-Partition, OL-Overload
# Display detailed Level-1 LSDB information.
<Sysname> display isis lsdb level-1 verbose
Database information for ISIS(1)
--------------------------------
Level-1 Link State Database
LSPID Seq Num Checksum Holdtime Length ATT/P/OL
--------------------------------------------------------------------------
1000.0000.0001.00-00* 0x00000016 0x314e 1130 112 0/0/0
SOURCE 1000.0000.0001.00
NLPID IPV4
NLPID IPV6
AREA ADDR 10
INTF ADDR 3.1.1.20
INTF ADDR V6 3::20
MTR ID 00 0/0/0
MTR ID 02 0/0/0
MTR ID 10 0/0/0
MTR ID 4000 0/0/0
+NBR ID
1000.0000.0002.01 COST: 63
IPV4 UNICAST NBR ID
1000.0000.0002.01 COST: 63 MTR ID: 10
IPV6 UNICAST NBR ID