R3303-About the HP 6600/HSR6600 Configuration Guides

ManualsBrandsHP ManualsNetwork HardwareHP HSR6602-G TAA-compliant Router

About the HP 6600_HSR6600 Configuration

Guides

The HP 6600_HSR6600 configuration guides are part of the HP 6600_HSR6600 documentation set.

They describe the software features for the HP 6600_HSR6600, and guide you through the software

configuration procedures. These configuration guides also provide configuration examples to help you

apply the software features to different network scenarios. The HP 6600_HSR6600 documentation set

includes 13 configuration guides:

Confi

uration

uide Content

Fundamentals Configuration Guide

Describes how to use the command line interface of the switch, log in to

and set up the switch, and use the basic management functions. This

guide includes:

• CLI

• Logging In to the Router

• FTP and TFTP

• File Management

• Configuration File Management

• Software Upgrade

• Device Management

Interface Configuration Guide

Covers the configuration of various interfaces. This guide includes:

• Ethernet Interface

• ATM Interface

• WAN Interfaces

• POS Interface

• CPOS Interface

• E-CPOS Interface

• Loopback and Null Interfaces

Layer 2 – LAN Switching

Configuration Guide

Covers Layer 2 technologies and features used on a LAN switched

network, such as VLAN technology, port isolation, MSTP. You can use

these features to divide broadcast domains, remove Layer 2 loops,

isolate users within a VLAN, re-mark VLAN tags, implement VLAN VPNs

over the Internet, and so on. This guide includes:

• MAC Address Table

• Ethernet Link Aggregation

• Port Isolation

• MSTP

• BPDU Tunneling

• VLAN

• GVRP

• QinQ

• VLAN Termination

• VLAN Mapping

• LLDP

Layer 2 – WAN Access

Covers WAN access technologies. This guide includes:

Summary of content (5 pages)

PAGE 1
About the HP 6600_HSR6600 Configuration Guides The HP 6600_HSR6600 configuration guides are part of the HP 6600_HSR6600 documentation set. They describe the software features for the HP 6600_HSR6600, and guide you through the software configuration procedures. These configuration guides also provide configuration examples to help you apply the software features to different network scenarios.
PAGE 2
Configuration guide Configuration Guide Content • ATM • PPP • L2TP • HDLC • Frame Relay • Modem Management Describes IP addressing (including static and dynamic IPv4 and IPv6 address assignment), network performance optimization, ARP, and interoperation between IPv4 and IPv6.
PAGE 3
Configuration guide Content Covers Layer 3 IPv4 multicast protocols IGMP, PIM, MBGP, and Layer 3 IPv6 multicast protocols MLD, IPv6 PIM, MSDP, and IPv6 MBGP), Layer 2 IPv4 multicast protocols (IGMP snooping, and multicast VLAN), and Layer 2 IPv6 multicast protocols (MLD snooping and IPv6 multicast VLAN).
PAGE 4
Configuration guide Content • RSH • Public Key • PKI • IPsec • SSH2.0 • SSL • SSL VPN • Firewall • ALG • Session Management • Connection Limit • Web Filtering • Attack Detection and Protection • TCP and ICMP Attack Protection • IP Source Guard • ARP Attack Protection • ND Attack Defense • URPF • FIPS Describes high availability technologies and features available on the switch for failure detection and failover. Failure detection technologies focus on fault detection and isolation.
PAGE 5
Configuration guide OAA Configuration Guide Acronyms Content • Mirroring • NetStream • IPv6 NetStream • Information Center • Flow Logging • sFlow • Gateway Mode • Host-monitor Describes how to log in to the HP open application platform (OAP) card connected to your device and reset the operating system of the OAP card. HP OAP cards use the open service architecture design, and enable you to provide custom services. • OAP Module • ACFP • ACSEI Lists the significant acronyms in the configuration guides.