R3303-HP 6600/HSR6600 Routers Fundamentals Configuration Guide

136
Task Command Remarks
Schedule a job.
• Schedule a job to run a command at a specific
time:
schedule job at time [ date ] view view-name
command
• Schedule a job to run a command after a delay:
schedule job delay time view view-name
command
Use either command.
If you execute the schedule job
command multiple times, the most
recent configuration takes effect.
Changing any clock setting can
cancel the job set by using the
schedule job command.
Scheduling a job by using the modular method
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Create a job and enter
job view.
job job-name N/A
3. Specify the view in which
the commands in the job
run.
view view-name
You can specify only one view for
a job. The job executes all
commands in the specified view.
4. Add commands to the
job.
• Configure a command to run at a
specific time and date:
time time-id at time date command
command
• Configure a command to run at a
specific time:
time time-id { one-off | repeating }
at time [ month-date month-day |
week-day week-daylist ] command
command
• Configure a command to run after a
delay:
time time-id { one-off | repeating }
delay time command command
Use any of the commands.
Changing a clock setting does not
affect the schedule set by using the
time at or time delay command.
Scheduled job configuration example
Network requirements
Configure scheduled jobs on the router to enable interfaces GigabitEthernet 3/0/1, GigabitEthernet
3/0/2, and GigabitEthernet 3/0/3 at 8:00 and disabled them at 18:00 on working days every week,
to control the access of the PCs connected to these interfaces.