R3303-HP 6600/HSR6600 Routers MPLS Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP HSR6602-G TAA-compliant Router

111

112

113

114

115

116

117

118

119

120

110

2. Enable OSPF to advertise host routes with LSR IDs as destinations. (Details not shown.)

After configuration, you can execute the display ip routing-table command on each router. The

output shows that all nodes have learned the host routes of other nodes with LSR IDs as

destinations.

3. Configure basic MPLS TE, and enable CSPF:

# Configure Router A.

[RouterA] mpls lsr-id 1.1.1.9

[RouterA] mpls

[RouterA-mpls] mpls te

[RouterA-mpls] mpls te cspf

[RouterA-mpls] quit

[RouterA] interface giabitethernet 2/1/1

[RouterA-GigabitEthernet2/1/1] mpls

[RouterA-GigabitEthernet2/1/1] mpls te

[RouterA-GigabitEthernet2/1/1] quit

# Configure Router B.

[RouterB] mpls lsr-id 2.2.2.9

[RouterB] mpls

[RouterB-mpls] mpls te

[RouterB-mpls] mpls te cspf

[RouterB-mpls] quit

[RouterB] interface giabitethernet 2/1/1

[RouterB-GigabitEthernet2/1/1] mpls

[RouterB-GigabitEthernet2/1/1] mpls te

[RouterB-GigabitEthernet2/1/1] quit

[RouterB] interface giabitethernet 2/1/2

[RouterB-GigabitEthernet2/1/2] mpls

[RouterB-GigabitEthernet2/1/2] mpls te

[RouterB-GigabitEthernet2/1/2] quit

# Configure Router C.

[RouterC] mpls lsr-id 3.3.3.9

[RouterC] mpls

[RouterC-mpls] mpls te

[RouterC-mpls] mpls te cspf

[RouterC-mpls] quit

[RouterC] interface giabitethernet 2/1/1

[RouterC-GigabitEthernet2/1/1] mpls

[RouterC-GigabitEthernet2/1/1] mpls te

[RouterC-GigabitEthernet2/1/1] quit

[RouterC] interface giabitethernet 2/1/2

[RouterC-GigabitEthernet2/1/2] mpls

[RouterC-GigabitEthernet2/1/2] mpls te

[RouterC-GigabitEthernet2/1/2] quit

# Configure Router D.

[RouterD] mpls lsr-id 4.4.4.9

[RouterD] mpls

[RouterD-mpls] mpls te