HP 6600 Router Series - HP A6600_HSR6602-CMW520-R3103P02 Release Notes Release Notes

Resolved Problems in CMW520-R2604P02

RTD061176

 Symptom: In the IMC display, the interface status is showed always DOWN if the interface belongs

to a link-aggregation group, in fact it is actually UP and passing data.

 Condition: None.

RTD061265

 Symptom: The link message cannot be deal with correctly, when the ICCN package does not

contain the AVP associate with proxy.

 Condition: Configure L2TP at A6600.

RTD061334

 Symptom: A6600 will ignore those routes with 0.0.0.0 address and miss them in BGP table.

 Condition: BGP peer advertise aggregation route with 0.0.0.0 attribute.

RTD061341

 Symptom: BGP route flapping occurs and persists for a long time. Traffic is interrupted.

 Condition: In a ring network, multiple BGP route reflectors and large numbers of BGP routes exist.

Then a port on the ring network goes up and down.

RTD061371

 Symptom: The command ‘display connection’ can only display 10 results.

 Condition: RPE-X1 is configured in the A6600.

RTD061451

 Symptom: There is data loss when the data path is through the interfaces on the FIP-200.

 Condition: RPE-X1 is configured in the A6600, link-aggregation group with members on different

FIP boards and netstream are configured at same time.

RTD061452

 Symptom: The interface cannot link UP after restarted.

 Condition: The fixed interface of FIP-110 is configured as ‘combo enable fiber, duplex full, speed

1000’.

RTD061542

 Symptom: H.245 cannot support the extendedVideoCapability field.

 Condition: None.

Resolved Problems in CMW520-R2604P01

RTD60467

 Symptom: The memory of the device leaks.

 Condition: Enable/disable BFD frequently.