HP HSR 6600 Router Series - HP A6600_HSR6602-CMW520-R3103P04 Release Notes Release Notes

RTD57528

 Symptom: Display the IPv6 information of the interface, A6600 router restarts automatically.

 Condition: IPv6 is configured at 10GE interface.

RTD57529

 Symptom: The BGP neighborhoods flush frequently.

 Condition: The usage rate of CPU is too high.

Resolved Problems in CMW520-R2603P02

RTD56361

 Symptom: The RIP route bypass the link cannot be deleted normally

 Condition: RIP and BFD are configured, the data link is single pass, send direction is normal, but

cannot receive data.

RTD56470

 Symptom: If the burst data package is too large, the amount of dropped package is too large.

 Condition: CBQ is configured at A6600 router.

RTD56636

 Symptom: The data link cannot up.

 Condition: The CPOS module work at t1 mode, and ‘frame-format sf’ is configured.

RTD56647

 Symptom: The MPU restart automatically.

 Condition: It happens when BGP and MSDP frequently flap at the same time.

1. Both BGP and MSDP protocols are configured on the router

2. The more MSDP and BGP neighbors there are, when both neighbors flap, the more likely this

trouble would happen.

3. If MSDP and BGP neighbors flap frequently, the more likely this trouble would happen.

RTD56718

 Symptom: The device cannot connect with some special LAC device.

 Condition: A6600 routers work as LNS.

RTD56752

 Symptom: The FTP client cannot connect with some ftp server through A6600 router, when the echo

message of enter passive mode is not ‘Entering Passive Mode…’.

 Condition: FTP client works as passive mode.

Resolved Problems in CMW520-R2603

RTD55118

 Symptom: A6600 routers cannot connect to some special device.