HP HSR 6600 Router Series - HP A6600_HSR6602-CMW520-R3103P04 Release Notes Release Notes

 On a device configured with an RPE-X1

<HP> copy b54D002main.bin slot41#cfa0:/

Copy cfa0:/mainb54d002.bin to slot14#cfa0:/mainb54d002.bin?[Y/N]:y

%Copy file cfa0:/mainb54d002.bin to slot14#cfa0:/mainb54d002.bin...Done.

 On a device configured with an RSE-X1

<HP> copy b54D002main.bin slot2#cfa0:/

Copy cfa0:/mainb54d002.bin to slot2#cfa0:/mainb54d002.bin?[Y/N]:y

%Copy file cfa0:/mainb54d002.bin to slot2#cfa0:/mainb54d002.bin...Done.

Step4 Specify the application file on the standby MPU to be used at next startup.

 On a device configured with an RPE-X1

<HP> boot-loader file slot14#cfa0:/mainb54d002.bin slot 14 main

This command will set the boot file of the specified board. Continue? [Y/N]:y

The specified file will be used as the main boot file at the next reboot on slot 14!

 On a device configured with an RSE-X1

<HP> boot-loader file slot2#cfa0:/mainb54d002.bin slot 2 main

This command will set the boot file of the specified board. Continue? [Y/N]:y

The specified file will be used as the main boot file at the next reboot on slot 2!

Step5 Use the display boot-loader [ slot slot-number ] command to view the application files to be used by

the active and standby MPUs for booting the system. Make sure the application files are of the same

version.

Step6 After rebooting the standby MPU using the slave restart command in system view, use the display

version command to view the current version of the application file. If the application file is of the new

version, you have succeeded in updating the application files on the standby MPU.

Step7 Use the display device command to view the status of the active and standby MPUs.

If both MPUs are in the normal status, the active and standby MPUs are normal.

 On a device configured with an RPE-X1

<HP> display device

Slot No. Board type Status Primary SubSlots

---------------------------------------------------------------------

0 N/A Absent N/A N/A

1 FIP-200 Normal N/A 2

2 N/A Absent N/A N/A

3 N/A Absent N/A N/A

4 RPE-X1 Normal Slave 0

5 RPE-X1 Normal Master 0

6 N/A Absent N/A 0

7 N/A Absent N/A N/A

8 FIP-200 Normal N/A 2

9 N/A Absent N/A N/A

 On a device configured with an RSE-X1

<HP> display device

Slot No. Board type Status Primary SubSlots

---------------------------------------------------------------------