HP HSR6602 Router Series FAQ

i
Contents
Q. What models does the HP HSR6602 Router Series include? ........................................................... 1
Q. Does the router support fixed 10 Gbps ports? ............................................................................... 1
Q. Does the 10 Gbps SFP+ port on the HSR6602-XG router support the WAN/LAN mode? ................... 1
Q. What is the memory size for the router? ....................................................................................... 1
Q. Is power over Ethernet (PoE) supported on the router? .................................................................... 1
Q. Can I use both AC and DC power supplies on the router at the same time? ...................................... 1
Q. Can I connect two AC power supplies to different power sources? .................................................. 2
Q. Are the power supplies of the router hot swappable? ..................................................................... 2
Q. Is the MPU of the router hot swappable? ...................................................................................... 2
Q. Does the router (including the software of the router) need any license registration? ........................... 2
Q. What FIP modules are supported on the router? ............................................................................ 2
Q. Does the router support SAP/OAP modules? ................................................................................ 2
Q. How are the slots and interfaces numbered on the router? .............................................................. 2
Q. How do I identify the card serial number or manufacturing information? ........................................... 3
Q. Can the router automatically adjust the fan speed? ........................................................................ 3
Q. Is the fan tray of the router hot swappable? .................................................................................. 4
Q. The fan tray LED has two states when I hot swap the fan tray. Why? ................................................ 4
Q. What is the airflow design for the router? .................................................................................... 4
Q. What are the operating temperature and alarm threshold for the router? .......................................... 4
Q. What types of transceivers can be installed in the ports on the MPUs of the router? ............................ 5
Q. Can I use SFP or SFP+ transceivers from other vendors? ................................................................. 5
Q. The optical power on a transceiver is too low. Why? ..................................................................... 5
Q. What will happen if the alarm "RX power is low!" is displayed? What should I do? .......................... 5
Q. What types of ports are autosensing? .......................................................................................... 5
Q. How can I solve the problem of fiber port failure? ......................................................................... 5
Q. Why do CRC errors occur on the ports of the router? ..................................................................... 6
Q. Can I connect a 1000 Mbps transceiver to a 100 Mbps transceiver? .............................................. 6
Q. Do I need to configure the full duplex and port speed when I connect a copper port and
a fiber port? ............................................................................................................................ 6
Q. Will fibers be affected if they are deployed with 10 kW high-voltage cables? ................................... 6
Q. Does the router provide built-in CF cards or support external CF cards? ............................................ 6
Q. Is the CF card on the router hot swappable? ................................................................................. 6