R3102-R3103-HP 6600/HSR6600 Routers ACL and QoS Command Reference

102
Usage guidelines
If no interface is specified, this command displays the CBQ configuration and operational information of
all interfaces.
If a VT interface is specified, this command displays QoS CBQ information of all VA interfaces inheriting
the VT interface, but does not display QoS information about the VT interface.
Examples
# Display the CBQ configuration and operational information of all interfaces.
<Sysname> display qos cbq interface
Interface: GigabitEthernet1/0/1
Output queue : (Urgent queuing : Size/Length/Discards) 0/100/0
Output queue : (Protocol queuing : Size/Length/Discards) 0/500/0
Output queue : (Class Based Queuing : Size/Discards) 0/0
Queue Size: 0/0/0 (EF/AF/BE)
BE Queues: 0/0/256 (Active/Max active/Total)
AF Queues: 1 (Allocated)
Bandwidth(Kbps): 74992/75000 (Available/Max reserve)
Table 33 Command output
Field Descri
p
tion
Interface Interface type and interface number.
Output queue Information about the current output queue.
Size Number of packets in the queue.
Length Queue length.
Discards Number of dropped packets.
EF EF queue.
AF AF queue.
BE BE queue.
Active Number of active BE queues.
Max active Maximum number of active BE queues allowed.
Total Total number of BE queues.
Available Available bandwidth for CBQ.
Max reserve Maximum reserved bandwidth for CBQ.
qos max-bandwidth
Use qos max-bandwidth to configure the maximum available bandwidth of the interface.
Use undo qos max-bandwidth to restore the default.
Syntax
qos max-bandwidth bandwidth
undo qos max-bandwidth