R3102-R3103-HP 6600/HSR6600 Routers ACL and QoS Command Reference

137
DAR commands
The following matrix shows the commands and router compatibility:
Commands 6602 HSR6602 6604/6608/6616
DAR commands Yes No No
dar enable
Use dar enable to enable DAR for traffic recognition on the current interface.
Use undo dar enable to disable DAR on the current interface.
Syntax
dar enable
undo dar enable
Default
DAR is disabled on an interface.
Views
Layer 3 Ethernet interface view
Default command level
2: System level
Examples
# Enable DAR for traffic recognition on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] dar enable
dar p2p signature-file
Use dar p2p signature-file to load the specified P2P signature file.
Use undo dar p2p signature-file to unload the specified P2P signature file.
Syntax
dar p2p signature-file filename
undo dar p2p signature-file
Default
No P2P signature file exists in the system.
Views
System view