R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

123
The output shows that the main next-startup configuration file has changed from aa.cfg to startup.cfg.
# Save the running configuration to the main next-startup configuration file without any confirmation
required.
<Sysname> save force
Validating file. Please wait....
Configuration is saved to device successfully.
On the HSR6602 router:
# Save the running configuration to the configuration file test.cfg without specifying the file as the
next-startup configuration file.
<Sysname> save test.cfg
The current configuration will be saved to flash:/test.cfg. Continue? [Y/N]:y
Now saving current configuration to the device.
Saving configuration flash:/test.cfg. Please wait...
............
Configuration is saved to flash successfully.
# Save the running configuration to the configuration file startup.cfg in the root directory of the flash, and
specify the configuration file as the main next-startup configuration file.
<Sysname> display startup
MainBoard:
Current startup saved-configuration file: flash:/hmr.cfg
Next main startup saved-configuration file: flash:/aa.cfg
Next backup startup saved-configuration file: NULL
<Sysname> save
The current configuration will be written to the device. Are you sure? [Y/N]:y
Please input the file name(*.cfg)[flash:/aa.cfg]
(To leave the existing filename unchanged, press the enter key):startup.cfg
Validating file. Please wait............
The current configuration is saved to the active main board successfully.
Configuration is saved to device successfully.
<Sysname> display startup
MainBoard:
Current startup saved-configuration file: flash:/hmr.cfg
Next main startup saved-configuration file: flash:/startup.cfg
Next backup startup saved-configuration file: NULL
The output shows that the main next-startup configuration file has changed from aa.cfg to startup.cfg.
# Save the running configuration to the main next-startup configuration file without any confirmation
required.
<Sysname> save force
Validating file. Please wait....
The current configuration is saved to the active main board successfully.
Configuration is saved to device successfully.
On the 6604/6608/6616 router:
# Save the running configuration to the configuration file vrpcfg.cfg in the root directory of the CF card
on both active MPU and standby MPU, and specify the file as the main next-startup configuration file.
<Sysname> display startup
MainBoard: