R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

131
boot-loader update slot
Use boot-loader update slot to upgrade the system software image for the standby MPU.
Syntax
boot-loader update slot slot-number
Views
User view
Default command level
3: Manage level
Parameters
slot slot-number: Specifies the slot number of the standby MPU.
Usage guidelines
The following matrix shows the command and router compatibility:
Command 6602 HSR6602 6604/6608/6616
boot-loader update
slot
No No
Yes (available only for the RPE-X1 or
RSE-X1 MPU, but not the MCP MPU)
This command only upgrades the main system software image for the standby MPU.
In FIPS mode, the file must pass authenticity verification before it can be set as a startup system software
image file.
Examples
# Upgrade the system software image for the standby MPU in slot 1.
<Sysname> boot-loader update slot 1
display boot-loader
Use display boot-loader to display system software image information, including the current system
software image and the startup system software images.
Syntax
display boot-loader [ slot slot-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
slot slot-number: Specifies the slot number of an MPU. If no MPU is specified, this command displays the
system software images on each MPU.
The following matrix shows the option and router compatibility: