R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

137
<Sysname> system-view
[Sysname] patch active
On the HSR6602 router:
# Activate patch 3 and all its previous DEACTIVE patches.
<Sysname> system-view
[Sysname] patch active 3 slot 0
# Activate all DEACTIVE patches.
<Sysname> system-view
[Sysname] patch active slot 0
On the 6604/6608/6616 router:
# Activate patch 3 and all its previous DEACTIVE patches on the standby MPU in slot 1.
<Sysname> system-view
[Sysname] patch active 3 slot 1
# Activate all DEACTIVE patches on the standby MPU in slot 1.
<Sysname> system-view
[Sysname] patch active slot 1
patch deactive
Use patch deactive to stop running patches.
Syntax
patch deactive [ patch-number ] slot slot-number
Views
System view
Default command level
3: Manage level
Parameters
patch-number: Specifies the sequence number of a patch, in the range of 1 to 200. If no sequence
number is specified, this command deactivates all ACTIVE patches. If a sequence number is specified,
this command deactivates the specified patch and all its subsequent ACTIVE patches.
slot slot-number: Specifies a card by its slot number.
The following matrix shows the option and router compatibility:
O
p
tion 6602 HSR6602 6604/6608/6616
slot slot-number No
Yes (fixed at 0, which
specifies the current device)
Yes
Usage guidelines
This command is not applicable to patches in RUNNING state.
Examples
On the 6602 router: