R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

139
Usage guidelines
This command does not delete patches from storage media. After being removed from the patch memory
area, the patches changes to the IDLE state.
Examples
On the 6602 router:
# Remove patch 3 and all its subsequent patches from the patch memory area.
<Sysname> system-view
[Sysname] patch delete 3
# Remove all patches from the patch memory area.
<Sysname> system-view
[Sysname] patch delete
On the HSR6602 router:
# Remove patch 3 and all its subsequent patches from the patch memory area.
<Sysname> system-view
[Sysname] patch delete 3 slot 0
# Remove all patches from the patch memory area.
<Sysname> system-view
[Sysname] patch delete slot 0
On the 6604/6608/6616 router:
# Remove patch 3 and all its subsequent patches from the patch memory area on the standby MPU in slot
1.
<Sysname> system-view
[Sysname] patch delete 3 slot 1
# Remove all patches from the patch memory area on the standby MPU in slot 1.
<Sysname> system-view
[Sysname] patch delete slot 1
patch install
Use patch install to install and run patches in one step.
Use undo patch install to remove all ACTIVE and RUNNING patches from the patch memory area.
Syntax
patch install { patch-location | file patch-package }
undo patch install
Views
System view
Default command level
3: Manage level
Parameters
patch-location: Specifies the patch file path, a string of 1 to 64 characters. The file must be saved in the
root directory of a storage medium.