R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

143
Parameters
patch-number: Specifies the sequence number of a patch, in the range of 1 to 200. If no sequence
number is specified, this command confirms all ACTIVE patches (including ACTIVE patches for auxiliary
CPUs) and changes their state to RUNNING. If a sequence number is specified, this command confirms
the specified ACTIVE patch and all its previous patches, and changes their state to RUNNING.
slot slot-number: Specifies a card by its slot number.
The following matrix shows the option and router compatibility:
O
p
tion 6602 HSR6602 6604/6608/6616
slot slot-number No
Yes (fixed at 0, which specifies
the current device)
Yes
Usage guidelines
After being confirmed, ACTIVE patches are set in RUNNING state and can continue to run after a reboot.
If not confirmed, ACTIVE patches are set in DEACTIVE state at a reboot.
Examples
On the 6602 router:
# Confirm patch 3 and all its previous ACTIVE patches.
<Sysname> system-view
[Sysname] patch run 3
# Confirm all ACTIVE patches.
<Sysname> system-view
[Sysname] patch run
On the HSR6602 router:
# Confirm patch 3 and all its previous ACTIVE patches.
<Sysname> system-view
[Sysname] patch run 3 slot 0
# Confirm all ACTIVE patches.
<Sysname> system-view
[Sysname] patch run slot 0
On the 6604/6608/6616 router:
# Confirm patch 3 and all its previous ACTIVE patches on the standby MPU in slot 1.
<Sysname> system-view
[Sysname] patch run 3 slot 1
# Confirm all ACTIVE patches on the standby MPU in slot 1.
<Sysname> system-view
[Sysname] patch run slot 1