R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

178
type and number. If no controller interface is specified, this command displays alarm information for the
transceiver modules in all controller interfaces.
interface [ interface-type interface-number ]: Displays the alarms that exist on the transceiver module in
an interface. The interface-type interface-number argument specifies an interface by its type and number.
If no interface is specified, this command displays alarm information for the transceiver modules in all
interfaces.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If no error occurs, None is displayed. Table 31 describes the transceiver module alarms that might occur.
Table 31 Common transceiver module alarms
Field Remarks
SFP
RX loss of signal Incoming (RX) signal is lost.
RX power high Incoming (RX) power is high.
RX power low Incoming (RX) power is low.
TX fault Transmit (TX) fault.
TX bias high TX bias current is high.
TX bias low TX bias current is low.
TX power high TX power is high.
TX power low TX power is low.
Temp high Temperature is high.
Temp low Temperature is low.
Voltage high Voltage is high.
Voltage low Voltage is low.
Transceiver info I/O error Transceiver information read and write error.
Transceiver info checksum error Transceiver information checksum error.
Transceiver type and port configuration
mismatch
Transceiver type does not match port configuration.
Transceiver type not supported by port
hardware
The port does not support the transceiver type.
XFP
RX loss of signal Incoming (RX) signal is lost.
RX not ready RX is not ready.