R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

188
Parameters
slot slot-number: Specifies the slot number of a card. If you do not specify this option, this command
reboots all cards.
subslot subslot-number: Specifies the subslot number of a subcard. It you do not specify this option, this
command reboots all subcards.
The following matrix shows the option and router compatibility:
O
p
tion 6602 HSR6602 6604/6608/6616
subslot subslot-number No Yes Yes
Usage guidelines
CAUTION:
• Device reboot can interrupt network services.
• If the main system software image file has been corrupted or does not exist, the device cannot reboot.
You must re-specify a main system software image file, or power off the device and then power it on so
the system can reboot with the backup system software image file.
For data security, if you are performing file operations at the reboot time, the system does not reboot.
You cannot use the reboot command to reboot the standby MPUs. Instead, use the slave restart
command (see High Availability Command Reference).
Examples
# Reboot the device. (Output not shown.)
<Sysname> reboot
# On an HSR6602, 6604, 6608, 6616, reboot the interface card in slot 2. (Output not shown.)
<Sysname> reboot slot 2
remove
Use remove to unmount a card or subcard.
Syntax
remove slot slot-number [ subslot subslot-number ]
undo remove slot slot-number [ subslot subslot-number ]
Views
User view
Default command level
2: System level
Parameters
slot slot-number: Specifies the slot number of a card.
subslot subslot-number: Specifies the subslot number of a subcard. It you do not specify this option, this
command unmounts the card.