R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

196
Views
System view
Default command level
3: Manage level
Parameters
maintain: Specifies that when the system detects any software abnormality, it maintains the current
situation, and does not take any measure to recover itself.
reboot: Specifies that when the system detects any software abnormality, it recovers itself through
automatic reboot.
Usage guidelines
The system always reboots a failed interface card or the auxiliary CPU system when an exception occurs
to them.
The exception handling method only works for the failed card. It does not influence the functions of other
cards.
Examples
# Set the exception handling method to reboot.
<Sysname> system-view
[Sysname] system-failure reboot
time at
Use time at to add a command to run at a specific time and date in the job schedule.
Use undo time to remove a command from the job schedule.
Syntax
time time-id at time date command command
time time-id { one-off | repeating } at time [ month-date month-day | week-day week-daylist ] command
command
undo time time-id
Views
Job view
Default command level
3: Manage level
Parameters
time timeid: Time setting entry, an integer that in the range of 1 to 10.
at time: Specifies an execution time, in the hh:mm format, where the hh value is in the range of 0 to 23
and the mm value is in the range of 0 to 59.
one-off: Specifies that the specified command is executed for once.
repeating: Specifies a recurring time schedule.