R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

199
Views
Job view
Default command level
3: Manage level
Parameters
time timeid: Time setting entry, an integer that in the range of 1 to 10.
one-off: Specifies that the specified command is executed for once.
repeating: Specifies a recurring time schedule.
delay time: Specifies the delay time for executing the command, in the hh:mm format or mm format.
• When the time argument is in the hh:mm format, the hh value is in the range of 0 to 720, and the
mm value is in the range of 0 to 59. When the hh value is 720, the mm value can be only 00.
• When the time argument is in the mm format, the mm value is in the range of 1 to 43,200, which
means the maximum value of the delay timer is 30 days.
command command: Specifies the command to be automatically executed, in the text format. The
specified command must be a complete command without interactive input.
Usage guidelines
The commands in a scheduled job must be in the same view.
Every job can have up to 10 commands.
The time ID (time-id) must be unique in a job. If two time and command bindings have the same time ID,
the binding configured most recently takes effect.
Changing a clock setting does not affect the schedule set by using the time delay command.
Use Table 36
when you add commands in a job.
Table 36 Command schedule options
Command Descri
p
tion
time timeid one-off delay time2 command
command
Schedules a command to run after a delay time.
The command runs only once.
time timeid repeating delay time2
command command
Schedules a command to run every the delay time.
NOTE:
• The commands in a scheduled job must be in the same view.
• Every job can have up to 10 commands.
• The time ID (
time-id ) must be unique in a job. If two time and command bindin
g
s have the same time ID,
the binding configured most recently takes effect.
• Changing a clock setting does not affect the schedule set by using the time delay command.
Examples
# Save the configuration file 5 minutes later.
<Sysname> system-view
[Sysname] job saveconfig