R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

201
Default
No view is specified for a job.
Views
Job view
Default command level
3: Manage level
Parameters
view-name: Specifies a view in which commands in the job run. A view name is a string of 1 to 90
characters.
Usage guidelines
Every job can have only one view. If you specify multiple views, the most recently specified view takes
effect.
Enter a view name in its complete form and make sure the view name is available on the device. Most
commonly used view names include monitor for user view, system for system view, GigabitEthernet
x/x
for Ethernet interface view, and Vlan-interface
x for VLAN interface view.
Examples
# Specify system view for the job creatvlan.
<Sysname> system-view
[Sysname] job creatvlan
[Sysname-job-creatvlan] view system
Related commands
• job
• time
usb device-port enable
Use usb device-port enable to enable the USB device port.
Use undo usb device-port enable to disable the USB device port.
Syntax
usb device-port enable type storage slot slot-number
undo usb device-port enable slot slot-number
Default
The USB device port is disabled.
Views
System view
Default command level
2: System level
Parameters
type storage: Specifies that the USB device port be connected to a storage device.