R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

38
Syntax
redirect timeout time
undo redirect timeout
Default
The idle timeout is 360 seconds.
Views
User interface view
Default command level
2: System level
Parameters
time: Specifies the idle timeout in the range of 30 to 86400 seconds.
Usage guidelines
This command is supported only on AUX user interfaces.
This command is applicable to user interfaces on which redirect is enabled. To enable redirect on a user
interface, use the redirect enable command.
Examples
# Set the idle timeout for redirected Telnet connections to 200 seconds.
<Sysname> system-view
[Sysname] user-interface aux 0
[Sysname-ui-aux0] redirect timeout 200
screen-length
Use screen-length to set the maximum number of lines to be displayed on a screen.
Use undo screen-length to restore the default.
Syntax
screen-length screen-length
undo screen-length
Default
Up to 24 lines are displayed on a screen.
Views
User interface view
Default command level
2: System level
Parameters
screen-length: Specifies the maximum number of lines to be displayed on a screen, in the range of 0 to
512. The value of 0 disables pausing between screens of output.