R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Command Reference

48
Default command level
3: Manage level
Parameters
level: Specifies a user privilege level in the range of 0 to 3.
Usage guidelines
User privilege levels include visit, monitor, system, and manage, represented by the number 0, 1, 2 and
3 respectively. You can change the user privilege level when necessary.
This command is not available in FIPS mode.
Examples
# Set the command level for users logging in through VTY 0 to 0.
<Sysname> system-view
[Sysname] user-interface vty 0
[Sysname-ui-vty0] user privilege level 0
After you Telnet to the device through VTY 0, the terminal only displays commands of level 0 in the help
information:
<Sysname> ?
User view commands:
cluster Run cluster command
display Display current system information
ping Ping function
quit Exit from current command view
rsh Establish one RSH connection
ssh2 Establish a secure shell client connection
super Set the current user priority level
telnet Establish one TELNET connection
tracert Trace route function
user-interface
Use user-interface to enter user interface view.
Syntax
user-interface { first-num1 [ last-num1 ] | { aux | console | vty } first-num2 [ last-num2 ] }
Views
System view
Default command level
2: System level
Parameters
first-num1: Specifies the absolute number of the first user interface.
last-num1: Specifies the absolute number of the last user interface. This argument must be equal to or
greater than the first-num1 argument.
aux: Specifies the AUX user interface.