R3102-R3103-HP 6600/HSR6600 Routers Fundamentals Configuration Guide

114
U
pg
radin
g
method Software t
yp
es Remarks
Upgrading system
software
System software image
(excluding patches)
This method is disruptive. You must reboot the device to
complete the upgrade.
Installing hotfixes System software image
Hotfixes (called "patches" in this document) repair
software defects without requiring a reboot or service
disruption.
Hotfixes do not add new features to system software
images.
Upgrading from the
Boot menu
System software image
Use this method when the device cannot start up
correctly. For information about this upgrading method,
see the release notes for your device.
Upgrading the system software
To upgrade the system software image on the 6602 router, perform the following tasks in user view:
Ste
p
Command Remarks
1. Use FTP, TFTP, or any other
method to transfer the system
software image to the root
directory of a storage medium
on the device.
See "Configuring FTP" or
"Configuring TFTP."
The image file must be saved in the
storage medium's root directory for
a successful upgrade.
2. Specify the file as a startup
system software image in user
view.
boot-loader file file-url { main |
backup }
In FIPS mode, the specified file
must pass authenticity verification
before it can be set as a startup
system software image.
3. Reboot the device.
reboot N/A
To upgrade the system software image on the HSR6602 router, perform the following tasks in user view:
Ste
p
Command Remarks
1. Use FTP, TFTP, or any other
method to transfer the system
software image to the root
directory of the device's
storage medium.
See "Configuring FTP" or
"Configuring TFTP."
The image file must be saved in the
storage medium's root directory for
a successful upgrade.
2. Specify the file as a startup
system software image in user
view.
boot-loader file file-url slot
slot-number { main | backup }
The slot number is fixed at 0.
In FIPS mode, the specified file
must pass authenticity verification
before it can be set as a startup
system software image.
3. Reboot the device.
reboot N/A
To upgrade the system software image on the 6604/6608/6616 router, perform the following tasks in
user view: